Crushing equipment widen range of cement sorts

Invention of cement provides a material basis for the development of construction.
From land engineering to water, underground engineering, cement plays an important role. Cement has been invented for a hundred years and it has always been the most widely used, the most consumed binder. In order to meet the needs of different construction, the increasing varieties of cement has reached more than 200 kinds. And the cement mill is of growing kinds. The cement grinding mill varies from traditional ball mill to new european trapezium grinding mill. Cement crusher includes jaw crusher, cone crusher,impact crusher,etc. In cement mining,cement grinding mill and cement crusher play a very important role. They can crush or grind the cment to required fineness for industry application.

Cement mill enlarges crushing materials category

The machine is new and medium and fine grinding equipment that is researched and developed in the last century and it is also widely used for replacing hammer crusher and impact crusher in the world. Mining ball mill is a mineral processing machine for milling the materials into powders after they are crushed. It is widely applied to the production of cements, silicate products, building materials, fireproof materials, fertilizers, glass, ceramics as well as nonferrous and ferrous metal processing industries. It could carry out dry and wet millings on different materials.
The stone directly falls into the high-speed rotary wheel from the above of the machine, under the driving force of the high-speed centrifugal force; it is impacted with high-speed and crushed with high-intensity with the other part target stone that is flying around the turntable in an umbrella form. After the stone is crushed with each other, it will be impacted, crushed and grinded between the turntables and cabinet for several times of the eddy current, in the end, directly discharged from the bottom of the machine. The ball mill is generally used to grind material 1/4 inch and finer, down to the particle size of 20 to 75 microns. To achieve a reasonable efficiency with ball mills, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced. Just like this, it will form a close-circuit ring for several time of cycling and the required granularity of the finished products is determined by screening equipment.

Latest trapezium mill hard to find lucky to have

Based on many years research, our mill experts designed MTM130X Series strengthened Ultra fine mill on the basis of our original patented product - MTM Series trapezium mill.
The MTM130X machine can be used for grinding various kinds of nonflammable and non-explosive minerals of which Moh’s hardness is less than 9.3 and moisture content are lower than 6%. Traditional cement mill also named as cement ball mill. Ball mill is an efficient tool for grinding many materials into fine powder. The Ball Mill is used to grind many kinds of mine and other materials, or beneficiation. It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry process and the wet process. It can be divided into tabular type and flowing type according to different forms of discharging material.

The High Pressure Mill is a new kind of Mill, which is invented by Zenith company chief engineer Mr Bai yinghui, who has been engaged in the suspension Mill’s research and development for many years. This new patent product——the High Pressure Mill , with high efficiency and low energy consumption has opened up an epoch of the international pulverizing industry. In order to meet the development needs of large quantities of mineral processing trends, crusher, mill product will inevitably need to have a greater degree of improvement in production and processing capacity. That will lead to the crusher, mill production enterprises accelerating technology research and development to introduce more types of efficient powder grinding equipment.
Features & Benefits of High Pressure Suspension Grinder Mill

B Series Deep Rotor VSI Crusher is a new generation and high effective product which introduces German technology, and owns many independent patents property. It integrates three crushing methods into one. All of these made it the core equipment in cone crusher and sand making industries. It is widely used in a variety of metals and non-metallic minerals, cement, refractories, abrasives, glass raw materials, construction aggregate, sand, metallurgical and other industries. Applicable for medium and fine crushing of various ores and rocks, such as iron ore, non-ferrous metal ore, corundum, bauxite, quartz sand, corundum, perlite, basalt materials. It incorporates three crushing styles: material on material, material on iron and falling at side. It is widely used in a variety of fields such as minerals, cement, sand, metallurgical and other industries.
As is known to all, the earth's crust is rock, which is a kind of composition mineral collection being made up of one or more mineral. By natural physical chemistry reaction or biological chemistry reaction, the crust generates natural elements with solid production of chemical composition or physical properties .And that forms minerals, the natural elements (such as gold, graphite, sulphur) or natural compounds (such as magnetite, chalcopyrite, quartz). There are various kinds of minerals and the minerals for human utilization called useful minerals. Ore concept is developing, with the growth demanding of the economy, resources distribution changes and the development of science and technology, more of the rocks may be upgraded to ore. At present in China, for example, the mineral collection with iron of 20% or more can be used as iron ore; And iron content less than 20% was divided into the rock. As the same, the definition of the gangue minerals is relative, too. It also changes along with the change of resources and economic and technological condition.

New cement dedicates more force to construction

Impact Crusher is suitable for crushing all kinds of materials, such as soft and medium hard ore. Impact crusher is able to do rough broken, medium broken and fine crushing operations. We use impact crusher, jaw crusher and ball mill to process slag, coal gangue and fly ash, which can replace limestone to produce cement. A new kind of cement made from clay high alumina materials and industrial residues (such as slag, fly ash, coal gangue), which are added with 5% special additives in condition of 700 degrees firing temperature. The energy consumption is only half of ordinary cement consumption. This cement does not require limestone, and coal combustion can be reduced by 50%, so dust and exhaust are reduced greatly. In addition, 50% of the raw material is waste residue, the pull and fold strength of this cement label is 2 to 3 times higher than the ordinary cement. For example, this new cement used in roads construction just needs half the thickness of the ordinary cement.
It is necessary to weed out backward cement production for structural adjustment of cement industry, which is inevitable choice for the low-carbon economic development path. In cement batching process, we have to make full use of industrial wastes to replace original raw materials or mixed materials. It is not only harmless to waste disposal, but also reducing the non-renewable resources consumption.

The mill belongs to fine grinding equipment. Ball mill in powder grinding processing line should be added cooling water at regular quantity. Do you wonder why should we do that?
 The ball mill rotation speed is related to the radius of gyration. The outer layer grinding balls rotation speed is greater than that of the inner grinding balls. When the grinding balls are at the same layer or the radius of gyration is near to each other, the grinding ball location can also impact rotating speed. The higher grinding balls location, the smaller rotation speed. Because positive pressure of the different cylinder layers ball is different, the friction suffered is also different. As the state of circular motion in different layers is different, there is relative sliding force at layers of grinding balls.

Ten points get roller mill ten cent satisfactory

LM-series vertical roller mill is one advanced mill, adopting top technology domesic and abroad, and based on many years’ mill experiences. It can crush, dry, grind, and classify the materials.
LM series vertical roller mill can be widely used in such industries as cement, power, metallurgy, chemical industry, non-metallic mineral. It is used to grind granular and powdered materials into powder with required fineness. There are ten advantages lead you can not help but choose it. Strengthened Ultrafine Mill Features

Ultrafine mill starts new superior powder times

XZM Ultrafine mill is widely used in making fine powder or micro powder, a new kind of machine for producing fineness and ultra-powder. grinding mill is mainly used for grinding the material with middle and low hardness, below 6% moisture, and the material should be non-explosion and non-flammability, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished production can be adjusted between 325-2500 mesh.
This Mining ball mill is made up of feeding part, discharging part, gyre part, transmission part (transmission part includes reducer, small transmission gear, generator and electrical control) and so on. It enjoys features like good abrasive resistance, stable and reliable operation.Inner structure of the Mining ball mill is made up of lining plate, grate plate, diaphragm, feeding and discharging devices. The lining plate is used to protect the tank body in order to avoid the impact and abrasion from materials. Different types of lining plates can be used to adjust the movement of materials. Our lining plates are provided by Luoyang anti-abrasion academe and have a large share in the global market with their fine design.

Global hunting for new practical efficient dryer

Industrial dryer has become more popular along with the growing needs of heavy industry. The drum dryer is one of the traditional industrial drying equipments, according to the usage, they can be classified into slurry dryer, coal dryer, shape-coal drying equipment. Because the equipment is relatively large, it is also known as large-scale dryer.
Industrial dryer features: dryer processing capacity is large, less fuel consumption, low-cost drying. The dryer has high temperature characteristics, and is able to use the high-temperature hot air to dry materials rapidly. Dryer is scalability, the design allows for the production margin, even if small output with a small increase, it doesn't need to be replaced. Equipment adopts special designed structure, and the tugs and rolling circle matched perfectly, so that it greatly reduces wear and power consumption. It is anti-overload, and tube body is able to be in smooth operation with high reliability.