Grinding mill gifted energy green delivery point

No resistance snail shell (small checking door so that there is not an eddy air flow): In the traditional grinding mill, the checking door of snail shell is prominent, that mean the checking door and snail shell are not on the same plane. So there will be eddy air flow easily come into being. As a result, the energy waste is bigger. MTW series mill make the inner surface of checking door stay with the inner surface of snail shell on the same plane, so the eddy air flow is avoided efficiently;
Calcined dolomite will be transported into finished hopper if the degree of fineness is between 5mm and 45mm. Otherwise the calcined dolomite will be put back into the storage for recycling. In this way we can not only avoid the cone crusher emission of solid waste, but also improve the grade of powder mine. Using dolomite crusher, we can easily crush the calcined dolomite and use it in production.
Repeated jaw crusher inspection process raise higher requirement to ball mill production, and now let’s talk about it one by one.
1, Delivery inspection: each ball must be approved by delivery inspection, and accompanied by certificate.
2, Delivery inspection items: delivery inspection must follow the rules below:
A, basic requirements for ceramic ball mill: should be consistent with the GB / T14253 regulations
B, safety and health: the ball mill rotating part should be solid, reliable and safe. The parts that may affect people safety should adopt corresponding safety measures; ball mill operation should be of no abnormal noise; no-load test noise should be lower than the specified.
Glass bottle crusher pulverizer systems for the mixed glass from single-stream programs are complete systems with a surge feed hopper, pulverizer, screen and conveyor packaged as a stand-alone system or integrated into an existing MRF. The bottles and other recyclable glass enter the crusher through a hopper. Material then passes into the pulverizer/hammer mill where electric motors turn rotating flexible hammers that crush the glass but leave the non-glass items in their larger, original form.
C, electrical equipment should comply with relevant standards.
D, performance requirements: ball mill should be kept stable rotation and flexible operation, reliable sealing performance, no loose phenomenon in each successive piece. No-load operation must be operated more than 2h and satisfy the requirement: normal operation; no leakage in gearbox main bearing; balanced running and no obvious vibration phenomenon;
load test (only after qualified no-load test) must be operated more than 12h and satisfy: work balance, no obvious vibration phenomenon; no leakage in gearbox main bearing; point temperature measuring is below 80 Celsius degrees in ball mill main bearing, temperature rises should be kept within 40 Celsius degrees; no loose phenomenon between fasteners.